[Libwebsockets] error for autogen.sh

"Andy Green (林安廸)" andy at warmcat.com
Sat Mar 30 03:32:44 CET 2013


On 30/03/13 03:10, the mail apparently from Dinesh Guleria included:
> Thanks for your reply Edwin.
>
>  >> I thought everything is cmake now instead of autotools.
> I just clone gitt hub.
>
> Should i follow this :---
> README.build in this folder ?

Yes... I just added an example working "toolchain file", and improved 
the documentation a bit

http://git.libwebsockets.org/cgi-bin/cgit/libwebsockets/commit/?id=5b479ac2f1cb7d8a9ded478b99c8257852317ab2

it works fine but make sure you nuke your build directory when switching 
between cross and host build cmake configure... cmake just ignores your 
change otherwise.

-Andy

> Regards,
>
> //Din
>
> On Sat, Mar 30, 2013 at 12:33 AM, Edwin van den Oetelaar
> <oetelaar.automatisering at gmail.com
> <mailto:oetelaar.automatisering at gmail.com>> wrote:
>
>     I thought everything is cmake now instead of autotools.
>     That happened some time ago (couple of months)
>     Are you using the latest version, as far as I know all autotools stuff
>     has been removed.
>     Good luck with your work,
>     Edwin
>
>
>     On Fri, Mar 29, 2013 at 6:56 PM, Dinesh Guleria
>     <din.gulu.er at gmail.com <mailto:din.gulu.er at gmail.com>> wrote:
>      > anyone who can suggest on this ?
>      >
>      > On Fri, Mar 29, 2013 at 7:58 PM, Dinesh Guleria
>     <din.gulu.er at gmail.com <mailto:din.gulu.er at gmail.com>>
>      > wrote:
>      >>
>      >> So i thoght to change to libtool 2.4.2 & installed it , Now i am
>     stuck
>      >> here  :-----
>      >>
>      >>
>     http://stackoverflow.com/questions/15704808/installing-new-version-of-libtool-for-libwebsocket-warmcat
>      >>
>      >> How to get it working ?
>      >>
>      >> Please suggest
>      >>
>      >> //Din
>      >>
>      >>
>      >>
>      >> On Fri, Mar 29, 2013 at 7:53 PM, Dinesh Guleria
>     <din.gulu.er at gmail.com <mailto:din.gulu.er at gmail.com>>
>      >> wrote:
>      >>>
>      >>> As per andy suggestion i used patch in this post :--
>      >>>
>      >>>
>     http://ml.libwebsockets.org/pipermail/libwebsockets/2013-January/000027.html
>      >>>
>      >>> Its getting configured but getting error at make :-----
>      >>>
>      >>> ==============================
>      >>>
>      >>> ./autogen.sh
>      >>> Preparing the libwebsockets build system...please wait
>      >>>
>      >>> Found GNU Autoconf version 2.69
>      >>> perl: warning: Setting locale failed.
>      >>> perl: warning: Please check that your locale settings:
>      >>>     LANGUAGE = "en_US:",
>      >>>     LC_ALL = (unset),
>      >>>     LANG = "en_US.UTF-8"
>      >>>     are supported and installed on your system.
>      >>> perl: warning: Falling back to the standard locale ("C").
>      >>> perl: warning: Setting locale failed.
>      >>> perl: warning: Please check that your locale settings:
>      >>>     LANGUAGE = "en_US:",
>      >>>     LC_ALL = (unset),
>      >>>     LANG = "en_US.UTF-8"
>      >>>     are supported and installed on your system.
>      >>> perl: warning: Falling back to the standard locale ("C").
>      >>> Found GNU Automake version 1.13
>      >>> Found GNU Libtool version 1.5.26
>      >>>
>      >>> Automatically preparing build ... done
>      >>>
>      >>> The libwebsockets build system is now prepared.  To build here,
>     run:
>      >>>   ./configure
>      >>>   make
>      >>>
>      >>> =====================
>      >>>
>      >>>
>      >>> but i am getting following error at make :--
>      >>>
>      >>> =======================================
>      >>>
>      >>> make  all-recursive
>      >>> make[1]: Entering directory
>      >>>
>     `/home/ignite/sbox2/rootfs/rfs-raspbian/home/pi/libwebsockets-fa17ca722544c9cdb14b87ca8a09fbcdc49d8cb5'
>      >>> Making all in lib
>      >>> make[2]: Entering directory
>      >>>
>     `/home/ignite/sbox2/rootfs/rfs-raspbian/home/pi/libwebsockets-fa17ca722544c9cdb14b87ca8a09fbcdc49d8cb5/lib'
>      >>> /bin/bash ../libtool  --tag=CC   --mode=compile gcc
>     -DHAVE_CONFIG_H -I.
>      >>> -I..    -Wall -std=gnu99 -pedantic  -rdynamic -fPIC -Werror -c
>      >>> -DINSTALL_DATADIR=\"/usr/local/share\"
>      >>> -DLWS_OPENSSL_CLIENT_CERTS=\"/etc/pki/tls/certs/\" -g -O2
>     -D_DEBUG -MT
>      >>> libwebsockets_la-libwebsockets.lo -MD -MP -MF
>      >>> .deps/libwebsockets_la-libwebsockets.Tpo -c -o
>      >>> libwebsockets_la-libwebsockets.lo `test -f 'libwebsockets.c' ||
>     echo
>      >>> './'`libwebsockets.c
>      >>> ../libtool: line 865: X--tag=CC: command not found
>      >>> ../libtool: line 898: libtool: ignoring unknown tag : command
>     not found
>      >>> ../libtool: line 865: X--mode=compile: command not found
>      >>> ../libtool: line 1032: *** Warning: inferring the mode of
>     operation is
>      >>> deprecated.: command not found
>      >>> ../libtool: line 1033: *** Future versions of Libtool will require
>      >>> --mode=MODE be specified.: command not found
>      >>> ../libtool: line 1176: Xgcc: command not found
>      >>> ../libtool: line 1176: X-DHAVE_CONFIG_H: command not found
>      >>> ../libtool: line 1176: X-I.: command not found
>      >>> ../libtool: line 1176: X-I..: command not found
>      >>> ../libtool: line 1176: X-Wall: command not found
>      >>> ../libtool: line 1176: X-std=gnu99: command not found
>      >>> ../libtool: line 1176: X-pedantic: command not found
>      >>> ../libtool: line 1176: X-rdynamic: command not found
>      >>> ../libtool: line 1176: X-fPIC: command not found
>      >>> ../libtool: line 1176: X-Werror: command not found
>      >>> ../libtool: line 1176: X-c: command not found
>      >>> ../libtool: line 1176: X-DINSTALL_DATADIR="/usr/local/share":
>     No such
>      >>> file or directory
>      >>> ../libtool: line 1176:
>     X-DLWS_OPENSSL_CLIENT_CERTS="/etc/pki/tls/certs/":
>      >>> No such file or directory
>      >>> ../libtool: line 1176: X-g: command not found
>      >>> ../libtool: line 1176: X-O2: command not found
>      >>> ../libtool: line 1176: X-D_DEBUG: command not found
>      >>> ../libtool: line 1176: X-MT: command not found
>      >>> ../libtool: line 1176: Xlibwebsockets_la-libwebsockets.lo:
>     command not
>      >>> found
>      >>> ../libtool: line 1176: X-MD: command not found
>      >>> ../libtool: line 1176: X-MP: command not found
>      >>> ../libtool: line 1176: X-MF: command not found
>      >>> ../libtool: line 1176:
>     X.deps/libwebsockets_la-libwebsockets.Tpo: No such
>      >>> file or directory
>      >>> ../libtool: line 1176: X-c: command not found
>      >>> ../libtool: line 1229: Xlibwebsockets_la-libwebsockets.lo:
>     command not
>      >>> found
>      >>> ../libtool: line 1234: libtool: compile: cannot determine name
>     of library
>      >>> object from `': command not found
>      >>> make[2]: *** [libwebsockets_la-libwebsockets.lo] Error 1
>      >>> make[2]: Leaving directory
>      >>>
>     `/home/ignite/sbox2/rootfs/rfs-raspbian/home/pi/libwebsockets-fa17ca722544c9cdb14b87ca8a09fbcdc49d8cb5/lib'
>      >>> make[1]: *** [all-recursive] Error 1
>      >>> make[1]: Leaving directory
>      >>>
>     `/home/ignite/sbox2/rootfs/rfs-raspbian/home/pi/libwebsockets-fa17ca722544c9cdb14b87ca8a09fbcdc49d8cb5'
>      >>> make: *** [all] Error 2
>      >>>
>      >>> ========================================
>      >>>
>      >>> Please suggest how to resolve it ?
>      >>>
>      >>>
>      >>>
>      >>> On Fri, Mar 29, 2013 at 7:41 PM, Dinesh Guleria
>     <din.gulu.er at gmail.com <mailto:din.gulu.er at gmail.com>>
>      >>> wrote:
>      >>>>
>      >>>> Hi,
>      >>>>
>      >>>> I am getting following error :----
>      >>>>
>      >>>> ====================================== error ====================
>      >>>>
>      >>>> /pi/libwebsockets-1.0-chrome25-firefox17$ sb2 -t rfs-raspbian -eR
>      >>>> ./autogen.sh
>      >>>> Preparing the libwebsockets build system...please wait
>      >>>>
>      >>>> Found GNU Autoconf version 2.69
>      >>>> perl: warning: Setting locale failed.
>      >>>> perl: warning: Please check that your locale settings:
>      >>>>     LANGUAGE = "en_US:",
>      >>>>     LC_ALL = (unset),
>      >>>>     LANG = "en_US.UTF-8"
>      >>>>     are supported and installed on your system.
>      >>>> perl: warning: Falling back to the standard locale ("C").
>      >>>> perl: warning: Setting locale failed.
>      >>>> perl: warning: Please check that your locale settings:
>      >>>>     LANGUAGE = "en_US:",
>      >>>>     LC_ALL = (unset),
>      >>>>     LANG = "en_US.UTF-8"
>      >>>>     are supported and installed on your system.
>      >>>> perl: warning: Falling back to the standard locale ("C").
>      >>>> Found GNU Automake version 1.13
>      >>>> Found GNU Libtool version 1.5.26
>      >>>>
>      >>>> Automatically preparing build ... Warning: autoreconf failed
>      >>>> Attempting to run the preparation steps individually
>      >>>>
>      >>>> Preparing build ... ERROR: aclocal failed
>      >>>>
>      >>>>
>      >>>> ================================================================
>      >>>>
>      >>>> Please suggest, how to resolve it.
>      >>>>
>      >>>> //Din
>      >>>
>      >>>
>      >>
>      >
>      >
>      > _______________________________________________
>      > Libwebsockets mailing list
>      > Libwebsockets at ml.libwebsockets.org
>     <mailto:Libwebsockets at ml.libwebsockets.org>
>      > http://ml.libwebsockets.org/mailman/listinfo/libwebsockets
>      >
>
>
>
>
> _______________________________________________
> Libwebsockets mailing list
> Libwebsockets at ml.libwebsockets.org
> http://ml.libwebsockets.org/mailman/listinfo/libwebsockets
>




More information about the Libwebsockets mailing list